Questions about: fastener

Drywall Installation — Cutting and Installing Drywall Cutting Drywall Lay the piece down (unfinished side down) on a flat clean surface free of anything that could damage the drywall. Measure your piece and place marking where the cut is to be made.
by Yoshiyahu Last Updated March 13, 2016 08:09 AM I am building a few temporary wall panels for a little nook in my basement. I would like to be able to put them up and take them down frequently. To do that, I would like to install latches that conne
Plumbing fittings come in all shapes and sizes, with each individual type being used for a specific purpose. Joints or elbows are commonly used, as well as tee and cross fittings. Most plumbing fittings are used to change the direction of the water's
These hangers have wide flanges for ease of nailing or screwing joist hangers, deck framinguse short hanger nails to attach the a ledger single header. Joist hanger nail size confused building & construction diy used wrong nails for joist remodel
My apartment has very shoddy walls. It's basically a truss construction (though I never encountered a truss in a wall, but a neighbor did), the space between the trusses is filled with sand and fine slag with a little gypsum or mortar as glue. The wa
So, I started with What type of screws and anchors are used for concrete? - but it's not particularly clear to me. I (hammer) drilled 5/32" holes into an exterior wall for 3/16" tapcon screws. These didn't hold
Use this method at least once a year to thoroughly clean and lubricate the track to your sliding door. If you have a screen door, remove it first—–it will easily lift up and out of the track. 1 Remove drapes, blinds or any other window furnishings fr