How do cedar and pine compare as decking materials?


The decking dilemma—which to choose?

Probably the most difficult decision to make when building a deck is what type of decking to use. All three choices—5/4 x 6-in. radius-edged cedar, pressure-treated and composite decking—share similarities. They’re all rot resistant to varying degrees, require 16-in. joist spacing for proper support, bleach out to a silvery gray, and can all be cut and installed using conventional tools and fasteners.

But alas, there’s no perfect choice. All have tradeoffs. Figure out what characteristics are most important to you, then make your selection based on that.

Three decking materials—treated, cedar and composite

These pairs show the contrast between new wood deck boards (right sides) and those that have been exposed to the elements for about two years (left sides). Each has tradeoffs in terms of cost, maintenance and appearance.

The pros and cons of cedar wood for a deck

If the natural look of wood is tops...

0 0

Comparing Decking Materials: Ipe, Teak, Cumaru, Garapa, Massaranduba, Treated, Cedar, Redwood, and Composites.

We know that there is a lot of information out there to digest when it comes to understanding which type of wood is best for your project. We wanted to provide a comparison of the specs and colors of the woods that we carry at, so you can see it all in one place. Once you understand the specs of all the woods using a tropical hardwood seems even more attractive.

Below are the Janka Hardness, Bending Strength, and Average Density for all of our decking woods and their major competitors. It also includes a basic cost guide, and, of course, the cut of wood and length needed will affect pricing. This can help you compare each species and how each cut of wood is priced, including Ipe Decking, Garapa Decking, Massaranduba Decking, and Cumaru Decking.

We are a high volume buyer so we can provide you the most competitive pricing for all of your...

0 0

Thought the only wood deck material to choose was cedar or pressure treated lumber?

The most common wood deck material is from the soft woods species. They are easy to work with and less expensive than denser species.

But if you thought cedar, pine or redwood were all you had to choose from, think again.

Why Choose Another Species?

Other types of wood can be harder, more resistant to insects, rot and have a different look or grain pattern.

Let's take a look at a comparison of each of the different wood that you can use for your decking starting from the most common to the lesser known types.

Pressure treated wood has evolved a lot so we wrote a separate page for the...

0 0

It's the most important decision you will ever make. Okay, not really, but your deck will be around for a long time. I'm Lacey Howard. Don't be overwhelmed by all the choices. Here's all you need to know to choose a material that will be beautiful for years to come. The two main categories for decking materials are woods and synthetics. Wood is the classic choice for a deck. Each species of wood has a distinct color and grain. Pressure treated lumber is the least expensive wood option. Pine or fir is infused with chemicals to make it extremely rot resistant. Pressure treated lumber manufactured after 2004 is arsenic-free and considered non-hazardous, but be sure to ask about the chemicals contained in any wood you select. Cedar, cypress, and redwood are naturally rot-resistant. They're all great choices for a deck. Cedar, cypress, and redwood costs more than pressure-treated lumber. Expect to pay about twice as much in material costs, but when you build a deck with these woods, you...

0 0

Quick Summary: Composite vs Wood Deck Cost

On average, a pressure-treated wood deck will cost between $15 to $25 per square foot including installation. A cedar wood deck will cost $30 or more per square foot. A composite deck will cost $30 to $45 per square foot installed.

Wooden Decks

Wood is the original and most common choice for decking. It is durable, economical and lasts for decades if properly maintained.

The vast majority of decks are made with Southern yellow pine, a cheaper wood that is pressure treated to prevent weather damage, rotting and insect damage. Higher-quality woods such as cedar and redwood don’t require any type of pre-treatment because they contain natural preservatives.

Try Our Free Deck Construction Quote Request Tool

Tell us some details about your needs and get connected to pre-screened companies in your area. Compare free price quotes from multiple companies and save time and money instantly! No...

0 0

How much a wood vs composite deck costs in 2017 should you build your from or plastic? . For many homeowners, the deck is an extension of home that becomes a what materials to use in building natural wood vs. Cost comparison composite decking vsdeck wood vscost vs2017 prices vs deck guide pros & cons. The main the cost and upkeep associated with each type of deckingcomposite decking picture i live for warm southern nights, which around here include quick summary composite vs wood deck. Expect to pay about trex was designed with the beauty of wood decking, but not all maintenance. Composite decks great day improvements. A composite deck will cost $30 to $45 per square foot installed 18 jul 2013 get the pros and cons of wood, plastic, more decking 'manufacturing costs are very low, versus a board which is best material cedar, pressure treated or lumber? We compare their durability, appearance 28 mar 2017 materials wood decks vs both come in low high quality, so quality not 29...

0 0

Generally speaking, when you compare common decking materials there are three choices: Cedar, pressure-treated wood and composite decking. Neither one is a bad choice. They vary in looks, durability and cost -- each with its own advantages and disadvantages. Below, we’ll talk about all three, and which one will best suit your needs.

Cedar is a popular choice because it is a less expensive alternative to redwood, while still being highly rot and moisture resistant. When weathered, cedar takes on a silvery gray appearance and easily accepts stains. Generally, most professionals figure a lifespan of 15 to 20 years for cedar decking. Cedar is a relatively soft wood, so consideration should be taken if used on stairs or areas where furniture and other objects will be dragged around constantly. Cost-wise, cedar is slightly more expensive than pressure-treated wood, but less expensive than composite. Of the three, it is the most natural choice, which means that it smells good and...

0 0

Below is a chart you can use to compare wood decking materials. This chart compiles information gathered through numerous tests conducted by the USDA Forest Laboratory. The results are conclusive. The hardwoods that OHC provides you far exceed the results of traditional woods like Treated Pine, Cedar, and Redwood.

While other suppliers choose to make grandiose claims about the woods like Ipe, we believe giving you the facts and information you need is more valuable. If you have any questions about how any of our hardwood deck materials might perform in your area, give us a call today.

OHC Decking Products Enhance Any Outdoor Space

Give OHC a call today to get a custom quote on our wood decking products. We can custom mill any number of profiles and have a wide breath of lengths and sizes to choose from.

Call our decking sales team today to get started:...

0 0


Redwood is the best choice for decking when considering a type of wood. Redwood has grown-in preservatives that give it both resistance to rot and insects. It is also the most stable of all softwoods. It will not warp, cup, or split like other woods will with moisture. Redwood is available in a wide variety of grades for an endless number of uses. The grade of redwood that we stock for decking, and other outdoor projects, is construction heart. This is the best choice for our climate because it does not allow for any sapwood. The heartwood is the only part of a redwood tree that carries the resistance to decay and insects. Any sapwood present in a piece of redwood, which is white in color, will rot as quickly as untreated pine. We also stock a clear grade called Heart B. This grade will also be all heartwood with a limited number of knots or blemishes allowed in a board. Heart B is generally requested for more finish work or accent pieces, such as handrail or...

0 0

You have two general options when choosing decking materials for your home: wood materials and composite materials. Wood is the most commonly used of all decking materials because it is generally easy to work with and is inexpensive when compared to some other types of materials. Composite materials are relatively new additions to the market, and they often combine wood fibers with plastics and other synthetic materials. Sometimes the boards can be made exclusively with these synthetic materials, eschewing wood to avoid decay or rot. A third and far less common option is aluminum.

Aluminum decking materials are very strong — in most cases, several times stronger than wood and composites — and it actually dissipates heat very easily, meaning the deck will stay cool during hot weather. The aluminum will not rot or rust, and bug infestations are extremely unlikely. This material is not often used, however, because it can be cost-prohibitive. It is usually far more expensive...

0 0

You have to consider the many types of materials that you can use to build your deck.

The final outcome of deck construction certainly depends on the homeowner’s choice of materials. Construction products you pick out will influence the cost, form and maintenance of your courtyard. There are numerous materials that can be bought in local hardware outlets. Nonetheless, you have to be careful selecting the best decking material.

Wooden Decks

Wood deck designs have been the unanimous option of many property owners for several decades. The major reasons for this choice are toughness and attractiveness. One of the most common techniques is treating wooden decks as a means of protection against decomposition and termites. Construction statistics revealed that almost 80 percent of homeowners opt for wood due to its affordability and enduring life span. Besides, granule patterns accentuate style and create an elegant look. It comes in different varieties and each one...

0 0

Solid wood — that is, wood cut into boards from the trunk of the tree — makes up most of the wood in a piece of furniture. The type of wood you choose determines the beauty and strength of the finished piece. Many varieties of wood are available, and each has its own properties. The following sections introduce you to the most common types of soft- and hardwoods.

Sampling some softwoods

Softwoods aren’t weaker than hardwoods. Softwoods come from coniferous trees such as cedar, fir, and pine and tend to be somewhat yellow or reddish. Because most coniferous trees grow fast and straight, softwoods are generally less expensive than hardwoods.

It’s also relatively easy to find sustainably grown softwoods (woods grown on tree farms to ensure an endless supply of wood); this means you’re not contributing to the deforestation of the world and will always have a supply of wood for your projects.

Following is a list of common softwood varieties and their...

0 0
0 0

10 tips for building decks that will last longer -… The first step of building a deck in Canada should be staying on the right side . and if you take steps to keep them dry they should last quite a long time. Cedar is by far the most common natural untreated decking material, usually 1.25" thick.

Cedar Decking vs Pressure Treated: Which is right for… 2 Oct 2015 . 10/2/2015 In this article we look at cedar decking vs pressure treated to help . here–you should use kiln-dried cedar lumber instead of pressure treated pine. . A cedar deck can last from 15 to 20+ years depending on maintenance . Pressure treated is budget friendly, as well as having a long lifespan.

Wood vs. Composite Decks - --- - Great Day Improvements Discover the benefits of both wood and composite decking options for your home. . I'm pleased to report our wooden deck should continue to stand for years. .. At the mid-price range, cedar, a beautiful wood that gives off an amazing . deck that can last for...

0 0

Adding a deck onto your home not only gives you a finished and polished outdoor area to enjoy, but also adds value and beauty to your home. As you prepare to make this important addition to your home, however, it is important first to have an understanding of the ins and outs of decking, specifically the materials that go into the construction of a deck. Choosing the right deck materials can make a big difference to the longevity of your deck and your enjoyment of it.

Understanding Your Options

A first step for any homeowner building a deck is deciding on the type of material to use. There are six common options across two categories (natural and synthetic). The benefits or pitfalls of each material option lay in the cost, maintenance required, expected longevity, rot and insect resistance, and aesthetics.

Natural Materials:
Pressure-Treated Wood

Pressure-treated wood is wood that has been pre-treated for increased resistance to moisture and the elements. The most...

0 0

Choosing Roofing Materials

Different Styles For Different Situations

Choosing the right roofing materials for your home might not be the most exciting way to spend your time but sooner or later you'll need a new roof. That's why it's important to understand what you're getting into (or under) so you can maximize the return on your investment.

What you basically need to know is that there are a range of roofing choices available to you, each with their own attributes. The important point here is that these options allow you to tailor your choice based on what factor is most important to you, be it budget, longevity, style or a combination of all three.

Typically, lower-cost roofing comes with a shorter lifespan while more expensive roofing has greater longevity. The trick is finding the right balance between those characteristics.

You should also be aware of the fact that the roof covering (the shingles or sheet metal) is part of a larger...

0 0

Everything you need to know about Ipe Decking.

Ipe (pronounced EE-pay) is the finest quality wood decking material available. From the Atlantic City Boardwalk, to Las Vegas' Treasure Island Resort, to your own backyard, nothing keeps its integrity or lasts as long as Advantage Ipe Decking™. Ipe is an exotic hardwood that is naturally resistant to rot and decay, is 8 times harder than California Redwood, and is guaranteed for 20 years without preservatives! Our Ipe Decking is responsibly harvested from well-managed forests to provide a truly renewable resource. Ipe has many benefits over teak and is available at a fraction of the cost. We ship our Ipe decking products direct to your home or jobsite.

Watch Extreme Ipe Decking Tests on DeckBusters™

Wondering if what you've heard about Advantage Ipe™ is true? Watch DeckBusters™ and you'll see the truth about which decking materials live up to the hype and which one's don't. If you've ever wondered what decking...

0 0