Mount horizontal 6" metal exhaust pipe to wall economically?

1

6.3. Cutting the hole in the wall for the connecting piping

(1) Cut a 80 mm (3-5/32 in.) diameter hole in the wall at the

position shown in the...

0 0
2

When you have metal studs, mounting a TV or hanging a heavy picture on the wall becomes slightly more challenging.

But, it’s still doable – and it’s all about having the right fasteners. So the first step is…

Step #1 – Get The Right Fasteners

Here are three different fasteners that you can use:

#1 – Drill Toggle

#2 – Toggle Bolt

#3 – Snap Toggle (Best Option)

I recommend the snap toggle, because I’ve tried all three and it seems to be the most robust option. You can find these at most hardware stores including Home Depot and Lowe’s, or you can click the links above and get them online.

Step #2 – Locate the Metal Studs

It’s important that you find the EXACT CENTER of the stud. Metal studs aren’t very wide (typically about...

0 0
3

A gen set exhaust system must collect gases from engine cylinders and discharge them as quickly and silently as possible. It must minimize back pressure, which can cause horsepower losses and temperature increases that can shorten the engine’s life.

Several factors impact the exhaust system performance. Building constraints, noise control, condensation, vibration, heat dissipation and building codes must be considered.

Exhaust Piping

Each gen set must be equipped with its own exhaust system. Ganging or sharing exhaust piping increases chances of fumes entering idle engines or equipment, subjecting them to corrosive gases.

Specify Schedule 40 piping. Its heavy duty construction dampens vibration and resists corrosion from condensate. To minimize back pressure from bends in the exhaust system, make sweeping 90 degree bends with radii of at least one and one half times the pipe diameter.

Exhaust piping should not exert more than 37kg (60 pounds) of...

0 0
4

Smoke exhaust ductwork, in Europe, is typically protected via passive fire protection means, subject to fire testing (typically to NBN EN 1366-8) and listing and approval use and compliance. It is used to remove smoke from buildings, ships or offshore structures to enable emergency evacuation as well as improved firefighting. In North America, fireproofed ductwork may be used for the purpose of smoke exhaust, but it is more common to use unfireproofed return air ductwork, whereby no fire testing or listings are employed to qualify the ductwork for this use. Evidence of this North American practice can be found in the 2010 National Building Code of Canada, 3.2.8.8. Mechanical Exhaust System, as well as Sections 909.16.2 and 910 of the 2015 International Building Code.

Means of construction[edit]

Similar to pressurisation ductwork, smoke exhaust can be built using:

The primary difference between pressurisation and smoke exhaust ducting is that one pressurises an...

0 0
5

In this chapter, I discuss the pipe that routes exhaust gases from the headers to the termination of the exhaust path, as well as pipe sizing, materials, bending methods, pipe clamping, and pipe support.

This Tech Tip is From the Full Book, PERFORMANCE EXHAUST SYSTEMS: HOW TO DESIGN, FABRICATE, AND INSTALL. For a comprehensive guide on this entire subject you can visit this link:LEARN MORE ABOUT THIS BOOK HERE

SHARE THIS ARTICLE: Please feel free to share this article on Facebook, in Forums, or with any Clubs you participate in. You can copy and paste this link to share: http://musclecardiy.com/performance/the-complete-performance-exhaust-pipe-guide/

Materials

To select exhaust pipe for a given application, first consider your budget. Expense factors include materials, quantity of pipe (single versus dual system), the application of a specialty coating, and pipe-bending labor. Stainless steel is more expensive than mild steel. The advantages of using...

0 0
6
List of Global Exhaust Flexible Pipe Companies Shanghai Triple Auto Parts Co., Ltd. Automotive catalytic converter,Automotive catalyst,Automotive aftertreatment system,Motocylce converter,Exhaust flexible pipe,General type,Setra,Neoplan,Volvo,Mercedes-Benz,MAN,Iveco,Renault,Scania,DAF,Catalytic converter,Accessory parts,Diesel ….Address:Suede Road,Putuo DistrictWuxi Huanyu Metal Hose Company automobile exhaust flexible pipe,Exhaust Flexible Pipe,.Address:Ehu, wuxi, jiangsu, ChinaNingbo Sandy Auto Parts Co., Ltd. Machining Parts,Auto Part,Auto Accessories,Stamping,stamping,exhaust,muffler,tips,Clamps,Exhaust Flexible pipe,braid flexible pipe,truck pipe,Contral Arm,vacuum Cleaner,Air compressor,spark plug,power plug pin,car jack,car mat,Others,See All Categories,.Address:No.5 Jingde Road, Guisi, Luotuo StreetKinrom Industries exhaust flexible pipe, flanges, clamps, auto spare parts,.Address:NO.528 yuanbaoshan road, Ningbo city, Zhejiang province, ChinaHeJian Adair Auto Parts Co., Ltd...
0 0
7

Muffler and tailpipe on a car

An exhaust system is usually piping used to guide reaction exhaust gases away from a controlled combustion inside an engine or stove. The entire system conveys burnt gases from the engine and includes one or more exhaust pipes. Depending on the overall system design, the exhaust gas may flow through one or more of:

Design criteria[edit]

Exhaust system of the Opel Corsa B 1.2 petrol

An exhaust pipe must be carefully designed to carry toxic and/or noxious gases away from the users of the machine. Indoor generators and furnaces can quickly fill an enclosed space with poisonous exhaust gases such as hydrocarbons, carbon monoxide and nitrogen oxides,[1] if they are not properly vented to the outdoors. Also, the gases from most types of machines are very hot; the pipe must be heat-resistant, and it must not pass through or near anything that can burn or can be damaged by heat. A chimney serves as an exhaust pipe in a stationary...

0 0
8


Metal Building 101


Star Building Systems Glossary of Metal Building Terms
This is a list of commonly used terms and their definitions. This list is not intended to be all inclusive, but rather to provide enough information to familiarize the reader with metal building terminology.

Click here to view PDF version.

A

Accessory
A building product that supplements a basic solid panel building such as a door, window, skylight,
ventilator, etc.

Active
(Metallurgy) A metal that will corrode in the presence of moisture and a “noble” metal (See Galvanic Action and Galvanic Series Chart in this Glossary).

Agricultural Building
A structure designed and constructed to house farm implements, hay, grain, poultry, livestock or other
horticultural products. Such structure shall not include habitable or occupiable spaces, spaces in which
agricultural products are processed, treated or...

0 0
9
BACKGROUND OF THE INVENTION

1. Field of the Invention

This invention relates to water distribution systems and more particularly, to a horizontally-mounted submersible pump assembly for distributing water from a water supply or storage tank to a pressure tank and maintaining water pressure in the pressure tank at a desired level. The horizontally-mounted submersible pump assembly of this invention is characterized by a submersible down-hole or well pump which is mounted inside a tube extending into a water supply tank in horizontal orientation. The immersed end of the tube is attached to a gate or butterfly valve for admitting water into the tube and flooding the pump and the opposite end of the tube extends through the wall of the storage tank and is flanged to an adapter pipe which communicates with the pump discharge and a water line which extends to the pressure tank. The butterfly valve is operated by a long valve stem extending upwardly through the water in the storage...

0 0