Power to shed from dishwasher spur

1

Hello! The ZETEC engine was used in the 1999 Ford Escort...I do not know what year your vehicle is, however the pin layouts are the same...

The Fuel Injector Fuse (30A) feeds the injectors via normally open contacts of the PCM Power Relay on a Red/White wire (which becomes Red at the injectors) on pin #12 of the Constant Control Module...
The wire colors of injector control leads (at the injectors) are..#3=Brown/Yellow...#1=Tan...#4=Brown/Light Blue...And #2=White

Wire colors at the PCM plug are...#3=Brown/White (pin 74)...#1=Yellow (pin 75...#4=Green/Orange (pin100)...and #2=Violet/Yellow (pin 103)...

Size restrictions on attachments do not allow me to send the entire PCM...aka...ECM pin layout to...

0 0
2

If you were to visit a high end appliance retailer, you might hear a salesperson mention "American style" or "European style" dishwashers. Those terms may be outdated, and they don't tell the whole story of different automatic dishwasher styles. But they do provide an interesting tidbit of appliance history.

Back in the 1980s, there was a pretty clear distinction between American and European style dishwashers. In Europe, dishwashers used mesh filters to catch washed-off food particles and internal water heaters to control temperature. They sat flush to cabinetry, and also had stainless tubs for quieter operation and better air drying performance.

In America, dishwashers used powered hard food disposers to grind up waste food particles, and featured a visible heating coil at the bottom of the machine to heat water and dry dishes. With larger tubs than their European counterparts, they usually stuck out past cabinetry.

Those design decisions were based on local...

0 0
3

How Products Are Made
COPYRIGHT 1996 Gale Research Inc.

Background

Washing dishes is not the most rewarding task. Cooking can be creative, but cleaning up afterward seems like a waste of time and leaves the person washing complaining about "dishpan hands." The development of the dishwasher has helped relieve some of the monotony, as well as the grease and grime. It operates on a simple principle of washing dishes that have been placed on racks inside the machine with multiple jets of water. The modern dishwasher has features that cater to fine glassware or the toughest pots and pans; multiple cycles that clean, sanitize, and dry; and under-the-counter or stand-alone models for every size, use, and price range. It is far from perfect; tough foods may need personal attention before and after dishes and pans are cleaned in the dishwasher, and few owners of crystal glassware and fine china are willing to trust them to a machine. But the dishwasher, like other...

0 0
4
anon994571
Post 42

Our dishwasher broke two years ago, and we've never replaced it. Both my husband and I prefer to wash dishes by hand. Many of our dishes are not dishwasher safe. You can't unanimously say that one is better than the other - it depends on the model dishwasher you have and how you heat your water.

Both my husband and I prefer to hand wash our dishes. We wash them after each meal - no stuck on food morsels! For us, there are many reasons why this is better: no dirty dishes piled up, waiting for a full load, no looking for something that's sitting in the dishwasher, waiting to be washed, no rewashing dishes/glasses that don't come out of the

dishwasher completely clean. We also use very little water (we're in California; we have a drought), and when we do run the faucet, we don't run it full blast.

My husband is a professional chef, and if he doesn't have an issue with me hand washing...

0 0
5
...
0 0
6

Now you are venturing into the world of obscure codes and abstract thinking.

the code definition of an AIR BREAK (for drainage).... a piping arrangement in which a drain from a fixture, APPLIANCE or device discharges indirectly into another fixture, receptacle or interceptor at a point below the flood level rim AND above the trap seal.

the code definition of an AIR GAP (for drainage).... the unobstructed vertical distance through the free atmosphere between the outlet of the waste pipe and the flood rim of the receptacle into which the waste pipe is discharging.

Now you can tell why the standard garbage disposal hookup, without an air gap, constitute an air break...not an air gap.

You are also trying to think and rationalize things in a normal fashion. How dishwashers fill or drain is not even the issue. The issue is protection of the water supply and how to best accomplish that. While it would be possible to place an backflow preventer on the line...

0 0
7
SATICHE - 0695Pranks To Pull On New Employees Sending new copy shop employees for double-sided transparencies. In the army, we sent new cooks for a can of dehydrated water. This actually worked cause new privates are conditioned to do what you say and everything in an army kitchen is dehydrated. I heard that someone was sent out to get striped paint. On arriving at the shop, he was sent back to ask if the stripes should be horizontal or vertical. Send the new apprentice to the boilerhouse for a bucket of steam. In the phone company, new employees are sent after sky hooks... Tell a friend that the gas station is hiring someone to change spark plugs in diesel engines for 8$/hour. See if he gets a job. I am reminded of the story, held to be true, about the new employee that had never worked with a desktop computer before. One of the office workers loaded a small program that made sounds like water running out of a drain. He then told this naive little thing that you needed to drain the...
0 0
8

Even though the dishwasher does most of the work, humans play a part too. Here are some guidelines that can help your dishwasher operate safely, effectively and efficiently.

Don't use regular dish soap. The suds will overflow the dishwasher.Don't overload the dishwasher. You need to leave room for the water jets to spray onto the dishes.Face the dirtiest part of the dishes toward the spray jets, which usually come from the center.Don't mix steel and silver items. Putting two different types of metal in contact in a humid environment is a perfect recipe for corrosion.Try to keep bowls, spoons and other dishes with identical shapes separated. Otherwise, they will tend to nest together, and the water cannot reach every part of the dish.Don't put wood, cast iron, fine china, crystal or hand-painted dishes into the dishwasher. Wash these items by hand.Use the dishwasher at a time of day when water pressure is high, such as late at night. The dishwasher will clean better if you're...
0 0
9

The term dishwasher can represent either a person who washes (cleans) dishes (a term commonly used in the food service industry) or a machine that performs a similar function. The latter usage is discussed in this article.

A dishwasher is a mechanical device for cleaning food utensils for preparation, keeping, serving and eating and drinking. They are found in restaurants and also in many kitchens of homes.

How dishwashers work

Unlike manual dishwashing, which relies largely on mechanical action to remove soiling, mechanical dishwashers use the circulation of quite hot (55-65 degrees Celsius or 130-150 degrees Fahrenheit) water (usually, but not always heated or brought up to temperature by an element) and very strong detergents (most far too alkaline for habitual exposure to the skin) to achieve its cleaning effect. The dishwasher therefore is mainly a device for spraying water on the dishes - first detergent-added water for cleaning purposes,...

0 0
10

by Chris Woodford. Last updated: June 23, 2017.

When you're feeling dirty, you jump in the shower. When your pots and pans are dirty, they take a shower too—in a magic machine called a dishwasher. Scrubbing old food off dirty dishes is a tedious chore many people love to hate. Thanks to an ingenious American called Josephine Cochran (1839–1913), who invented the first automatic dishwasher in 1886, jobs like this can be a thing of the past. In Cochran's machine, you simply loaded your dirty crockery into baskets and the machine showered it clean with jets of hot and soapy water. Dishwashers have changed very little in the century since then—but how exactly do they work? Have you ever stopped to think what goes on inside the machine after you close the door? Let's take a closer look!

Photo: Inside a dishwasher. When the door closes, pieces of rubber around the frame ensure a tight seal so no water can escape. Note the soap dispenser on the top of the open door....

0 0
11

Your machine's flexible waste hose has to discharge into a waste pipe or trap above the level of the top of the drum. One option is to hook the hose into the top of an open standpipe with a P-trap at its base. From the trap, the waste pipe must run through your outside wall to a hopper head or gully, or directly into a soil stack. The air gap at the top of the standpipe will stop any dirty water siphoning back into the machine. Some manufacturers recommend a standpipe, and some water companies insist on it. The easiest solution though, is to put your machine next to a sink and change your sink trap to a washing machine trap - which has an inlet for the waste hose. Install a non-return valve to prevent the back-siphonage of waste water; or fix a hook to the underside of the work surface and tie the hose to it, so that it runs higher than the level of the sink...

0 0
12

Please also see our project on the New Wiring and Cable Colours.

Adding a Spur to an Existing Socket

Warning: To complete electrical works you must comply with Electrical Regulations - Click here for more information.

Part P of the new building regulations

could involve a check on any additional circuitry by qualified electricians when you sell your home. This can affect your sale, you could be breaking the law and your house insurance may not be valid. Please be absolutely sure you know what you are doing and get all of your work checked by a qualified electrician

Very often we find we do not have enough sockets at home. It is not a difficult job to add another but there are certain rules to follow.

A spur can be connected to an existing socket, on either a ring main or a

radial circuit

, providing that socket does not already have a spur. That is only one spur per socket is allowed and the number of spurs must not exceed the number of...

0 0