Reparing hole in hallow part of hardwood floor


i would start by digging out the area a little bit to see how bad the hole is. if its not to deep or just a sign of a bigger problem, i would fix it like so:

1) using lacquer sticks and an alcohol lamp (you can get these at lee valley or rockler, etc) melt down different colours until you get approximately the right colour.

2) get a little crucible, like a small soup ladle or something. heat up twice as much as you think you will need to fill the void. once its all melted, pour into the hole (you can patch any little cracks or holes internally with kleenex, plasticine, whatever - prior to pouring). the heat and the chemistry of the lacquer sticks will let it flow into every little crevice and bond tightly to the existing wood (like a dental filling). fill until its just at the surface.

3) once the lacquer has cooled, it will suck in a little. now put more lacquer in as necessary using burn-in method (just check youtube for how to do this - its an art, so be...

0 0

A solid healthy piece of oak would never collapse like that. You need to figure out what is going on before you fix it. Look at the underside if you can, break away any of the edges of the hole that come out easily (preferably without getting into the surrounding pieces) and try to figure out what you're dealing with. Look hard for moisture or evidence of insects. If you find anything suspicious, those problems must be dealt with first.

If ,however, the hole is pretty localized and the rest of the floor feels dry and solid, you can reasonably assume that it was an isolated defect in that piece and proceed with a patch. Here's a pretty decent tutorial on patching hardwood flooring:


0 0

Termites The Silent Destroyers Bidvest Steiner.Basement Amp Crawl Space Moisture Control.Age Of A House A Photo Guide To Building Age.The New Normal Front Room Flooring Campaign.Termite Damage To Walls Signs Amp Evidence Of Termite Wall.Termite Proof Drywall General Discussion Contractor Talk.Warped Wood Floor Problems In New Rochelle Danbury And.How To Repair Hardwood Floors The Craftsman Blog.Termites Amp Termite Control Baltimore.Termite Damage In Bathroom.Tipos De Termitas El Blog De Todoplagas.Choosing A Timber Floor Timber Floors Sydney.Cleaning Tar Like Substance Off Old Hardwood Floor.Tiny Holes In Wood Floor Thefloors Co.How To Hand Scrape Wood Floors Old House Restoration.Termite Damage Signs Detecting Termite...

0 0

**This post contains affiliate links**

We interrupt your sanding-hardwood-floors pleasure to bring you...

This hole.


My kitchen floor- the one I've been scraping glue off of and sanding down tirelessly? It had a hole in it.

At one time in it's 75 years, the kitchen was set up rather differently than it is now- namely, the sink was in a different place. This hole is probably the hole that a pipe was plumbed through to the sink at one point. And, while it's handy when you're trying to hand tools back and forth to your hubby in the basement while you're upstairs, we didn't really want to keep this hole in the kitchen forever.

As you can see, the hole itself wasn't very even- time and probably less-efficient tools resulted in some jagged edges- not ideal for plugging up an old hole.

We used a

Roto Zip

to remove those jagged edges and get the hole to a uniform shape so we could make a plug that would fit tight.


0 0

Nail holes or “Shiners” – visible nail heads – on hardwood floors often spoil the attractive and uniform appearance of most hardwood floors. They are a common problem when working with reclaimed wood, which already has holes from its previous use. Nail holes are an eyesore, and they could also harbor pests, dust, or trip people and cause painful scratches when objects get lodged in them. If you wish to make your floor look good, you should follow the following simple steps that give insight into how to repair them and get rid of pest and dirt.

Available Options in Repairing Nail Holes

You can repair these holes through a refilling process in which you can use either putty or filler complexes. Most people often refer to both filler materials as ‘wood filler.’

But even though the two are meant to serve the same purpose, they are different, and it is prudent to learn how each one of them is used so as to get the best outcome.

Wood putty is preferable when...

0 0

Termites may be important for the ecosystem, but no homeowner would ever be happy finding these insects crawling around their home. These creatures are capable of causing great destruction to homes and, of course, their favorite hardwood floors. Repairs of these damages can be quite costly. Fortunately, some termite damage to hardwood floors can be salvaged without replacing the hardwood.

Check out how we repaired this termite damage in hardwood floor without removing and replacing the whole board!

Step 1: Isolate the hole in the hardwood floor.

Step 2: Shape the filler piece of wood to fill the hole.

Step 3: Install the filler wood piece and wait for the epoxy to dry.

Step 4: Shave the filler wood to be leveled with the hardwood floor.

Step 5: Add stain and grain marks to the filler wood piece.

Step 6: Wait for the wood stain to dry.

Finished! Where did the termite damaged hole in the hardwood go?

Looking for a hardwood...

0 0

Thanks for your answers. I'm hopeful now because it is site-finished flooring. I was worried they wouldn't be able to match it since the grain in the flooring is so varied. How do they match it?

FWIW, the installers had to use putty or something in a couple areas (before they finished the floor) and they didn't even try to match it.

Funny you should mention the spot furniture repair because the item also took a chunk out of our cabinet on its way to the floor. btw, the item wasn't that heavy. It's amazing how much damage a wii game system can do. I guess it landed on its corner. Of course there was some momentum since DS yanked the cord, which pulled on the door, which pulled the wii off the shelf and into the cabinet and then into the floor. You probably couldn't even re-create it if you tried. Just our...

0 0

If you would like to learn hardwood floor repair, this article will explain the basics of how to remove damaged planks and replace them with new ones.

It only takes a single damaged area of flooring to ruin the appearance of your entire room, which is why it is so important to understand the basics of hardwood floor repair. The good news is that the procedure is fairly easy; you just have to make sure that you have the proper tools and instructions ahead of time. Before you begin, make sure that you have the following: circular saw, ruler, utility knife, belt sander, hammer & chisel, mallet, table saw, miter saw, nail gun, sand paper, and tack cloth. Now you are ready to begin repairing hardwood floors.

The first step in the hardwood floor repair process is to remove the plank that is damaged. You can begin by drawing a line down the center of the plank to act as a guide because this is where you will be cutting. It is imperative that your saw be on a setting so it...

0 0

Great Indoors Wood Floors can artfully repair many kinds of damage done to wood floors. Typical kinds of damage include:

Gouges or Deep scratches in the wood Holes from the installation of carpet tack strips Drill holes – the over-anxious cable guy causes lots of damage Water damage – water leaks and plant watering accidents happen all the time! Heavy wear areas or dull color areas – the areas most traveled wear the most Pet stains – pet urine can make dark spots on wood floors Fire damage

We have many ways of repair damage to wood floors including:

Cut out damaged wood and replace it:

With badly damaged sections of hardwood floor, new wood can be cut to fit and then refinished to match the surrounding wood foor.

Epoxy patching and faux painting:

For smaller blemishes such as small gouges and drill holes, we use an epoxy wood filler and then “paint” the epoxy to match the wood color and grain.

Surface scratches and dull...

0 0

View photo gallery instructions for this project

It is simpler to replace square-edged boards than tongue-and-groove boards, since they do not have interlocking edges. Take care to avoid damaging cables and pipes below floor level.

Mark a pencil line on the damaged board over the nearest joist (Image 1). If the damage is central, mark lines on joists either side of the damage.

Lever up the broken board, using a pry bar (Image 2). Rest the pry bar on a wood offcut to avoid damaging the floor.

Once the board has been raised high enough, place wood offcuts underneath to hold it in a secure position (Image 3).

Saw along the pencil lines to remove the damaged section of board (Image 4). Protect the floor with a spare piece of board.

Using the damaged section of board as a template, mark the new board and cut it to size (Image 5).

Position the new section of board in the gap, and nail it in place (Image...

0 0

Hardwood floors are one of the most commonly used flooring materials, and can be found in almost any home. More than likely, you will run into hardwood floors in one of your homes. It’s best to know how to respect and care for this beautiful, rich-grained material.

Maybe just as commonly found are scratches in these floors. Some scratches can add character to your hardwood floors, while others you can’t stand to see.

From light surface scratches to deep scratches, let’s see what you can do to repair these easy fixes.

Tools and Supplies

Soft clothWaterHardwood floor cleanerHardwood floor stain markerProtective coatingFine steel woolWax wood repair stickMineral spiritsScouring padPolyurethane coatingPutty knifeWood filler

Light Surface Scratches

These kinds of repairs are easy because only the top layer of protective coating of your hardwood floors was scratched. If you don’t have a lot of experience with hardwood floors, sometimes it’s best to...

0 0

Scratches and small holes in hardwood floors can be real eye sores and considered to be a nuisance to repair or hide. It does not matter whether your hardwood floor is made out of maple, walnut, mahogany, bamboo or oak. Patching the scratches and holes yourself will help you spare a lot of money because you will not need to call for professional help.

Step 1 – Identifying the Scratch

First of all, you need to identify the location of the scratch and make sure that it is really a scratch. Sometimes what you think to be a scratch is not a scratch at all, but only a mark on the surface of your hardwood floor. Now check whether the scratch is situated on the floor finish or deeper into the wooden floor.

Step 2 – Fixing the Scratch

If the scratch is a superficial one, you can fix it with some wood finish. Rub the scratch gently at the edges with sandpaper. This will help the finish to stick onto the scratch. In case the finish is made of urethane, utilize a...

0 0

Last year I bought a house built in 1930. It had really bad squeaks in the floor. I tried the powder between the boards and all that did was make a huge mess.

Try Counter-Snap Floor Repair Kit. I am not affiliated with this company in any way and am not making any money off this recommendation. But I used their special screws and the squeaking went WAY down. There are still some spots that squeak a little bit that I could fix but I kinda like the soft squeaks.

The problem with most screws is that the head is so large and it’s ugly. With these screws, you break the screw off below the surface of the wood, so all that is left is a whole the size of the threads and not the size of the screw head. Then you get some colored filler and fill in the holes. You can find the spots if you look hard but they are really well hidden. I even used these screws on some linoleum floors in the...

0 0

With natural wood floors, holes are inevitable. Knots, cracks, spaces between the boards and nails all make holes in the floor. There are several types of fillers to use with different types of holes in a wood floor. Each type of wood filler has its own disadvantages and advantages and works best for a specific kind of project or hole.

Latex Filler

Latex wood filler is one of the most commonly used fillers for filling holes in wood floors. It works for filling wood cracks, knots and nail holes. Many latex fillers come pre-dyed to match the colour of stained woods. Simply apply the filler to a hole in the wood, allow to dry, then sand down to the level of the rest of the wood. The problem with this filler type is that it cannot be applied to prefinished wood, and if the hole is large, it is easy to tell where the filler was applied.

Epoxy Filler

Epoxy filler is often used to fill wood holes because it dries in less than 10 minutes in many cases. The...

0 0

When working on a hardwood floor in an area that was previously covered with a radiator or a plumbing system, there will often be multiple pipe or conduit holes in the floor that you’ll have to repair.

Luckily, this is a relatively easy fix. You can fill up pipe and conduit holes using wood plugs that are the same size as the holes and the same wood species as the existing floor.

Here’s how to repair a pipe or conduit hole in a hardwood floor.

Step 1: If the holes penetrate through the subfloor, install a new subfloor base to fit beneath the wood plug. Need to stock up on wood plugs? We stock plugs in bulk for various species.

Step 2: Vacuum any debris in and around the hole.

Step 3: Line the bottom of the hole and the sides of the wood plug with 3M Epoxy using a mixing nozzle and application gun.

Using a 3M Scotch-Weld EPX mixing nozzle will ensure that you obtain the appropriate mixture of A/B material in the...

0 0

How To Repair A Hardwood Floor

Yet the most costly hardwood floors can have situations and this is the explanation why it’s imperative for any individual with hardwood floors or even the aforementioned wanting to commission floors memorize the nuts and bolts of hardwood floor repair.

Yet the most costly hardwood floors can have situations and this is the explanation why it’s imperative for any individual with hardwood floors or even the aforementioned wanting to commission floors memorize the nuts and bolts of hardwood floor repair. Woods are inclined to harms for example scratches and dings and the aforementioned situations can run from minor to major which unfortunately can harm the primary structure. You can consistently search out a master to do the repair but before you do that, you might as well know that DIY hardwood floor repair is plausible. When you recognized instituting wood floors, you should have been educated that one normal situation in a floor...

0 0
Hardwood floors are usually interconnected when they are laid down. So, if you have a damaged section of your flooring, you can't just pry it up. You would have to take out the whole floor first! This guide will give you some advice on patching a section of your hardwood floor.


If you kept the extra wood from when the floors were laid down, you should use those pieces, since they will match what you have. Otherwise, go to your local home improvement warehouse and find out if they have the same brand and model of flooring. If not, you can sand and refinish other flooring of the same wood type, but it won't blend as well with the wood surrounding it.

How to Patch Hardwood

First, determine the area needing to be removed for this patch to be successful. Keep aesthetics in mind as you do this too; you may want to remove a little more wood than is necessary in order to preserve the "staggered" look of a hardwood floor. You can use a circular saw to split the...
0 0

The choice of flooring is one of the most basic yet important decisions a homeowner has to make when undertaking a renovation, as it underpins everything else. While there are plenty of different options, from carpet to terrazzo, one material is the acknowledged standard: hardwood.

But not all hardwood flooring is created equal, and selecting a product isn’t simply a matter of choosing a preferred color. A range of other factors can have an impact on both aesthetics and performance.

To explore the many options available, we spoke with three experts: Scott Jones, director of product management at Carlisle Wide Plank Floors; James Caroll, principal of LV Wood; and Mara Miller, partner at the AD100 firm Carrier and Company Interiors. Once you find the perfect fit for your space, you'll need to think about installation. While may choose to hire a professional to install their floors, some intrepid homeowners go the...

0 0
0 0