Questions about: sprinkler-system

1 Isolate where the leak is. This might require a little bit of digging, often where the water is coming out of the ground is not always the source of the leak. Once you have isolated the leak, turn off the water to that line, or area
Question is not clear. Do you have programming problem with the timer? Or problem locating sprinkler heads? Or a sprinkler valve problem? Add a comment with detailed information. Sprinkler timer turns ON-and-OFF
Hello experts,I have a couple of issues with my residential sprinkler system. I have a couple of ideas of how to remedy those issues, but I would like to run them by you before I attempt to implement them and possibly waist money and well, perhaps ma
The neighbor is a plant nursery, which use sprinklers to water inventory late at night. The report is that their sprinklers are watering our building which is an issue. As I understand it, even if the sprinkler are put back into calibration to avoid
A tree has been felled and its wood removed, but the rest still sits there, firmly rooted in the ground. What you need now is a strategy for removing tree stumps. What is the best way to solve this landscaping problem? You can hire someone with a stu
One more twist if you don't mind. . If I wanted to use a transmitter/receiver to do my bidding -- using one of these binary transmitters and one of these for the receiver (4 channel mind you), I think I could make this work for about $200
I am installing a new sprinkler valve system. Everything was pre-assembled with three valves, all I had to do was connect the incoming water and outgoing water. As part of the "testing" procedure it says to "turn manual bleed screw counterclockwise u
For years, the automatic sprinklers in my house worked fine (they were there when I bought the house). A few months ago, I noticed that the station which controls drip irrigation for shrubs would not shut off. After some lightweight troubleshooting,
About Automated Sprinkler Systems The Advantages of Owning an Automatic Sprinkler System If you are considering installing an automatic sprinkler system on your own or hiring a professional to do the job, the following answers to frequently asked que
"Should I just replace the entire valve and assume the wiring is good?" Don't assume, you should test the wiring by connecting the wires from the problem valve to the valve next to it and activating that station using the Manual feature on your timer