Questions about: water-heater

Per the instructions with my new water heater, I drain a gallon from the bottom every month. The previous owner of my home never did anything and that water heater started leaking, hence the replacement. The water in our area is hard-ish, but I hesit
If a faucet is dripping, or a toilet is running, or if a leak develops in a refrigerator ice maker or dishwasher or washing machine--or any appliance supplied by water, your first and best choice is to shut off the water right at that fixture or appl
I came home from work today to find that the hot water wasn't working. I opened the area to my gas hot water tank and there's a large pool of water on the ground. I checked the pilot light and it appears to have gone out
We installed a Navien 240S natural gas in our house, and it is working fine. Except the short range for hot water valves in the showers. So, in other words, I need to turn shower valve almost all the way on to start the hot water
So I am considering instant water heater systems, in Indonesia. Here electricity is typically low amperage (household supplies start at 450W, then 1100W, then 2200W), and there's a strong incentive to avoid high power consumption appliances (because
One problem that can be seen often on water heaters is the corrosion that occurs around the water inlet and outlet fittings. One problem that can be seen often on water heaters is the corrosion that occurs around the water inlet and outlet fittings.
Answer to Question asked originally That appears to be unused piping that goes nowhere now. The valves were shutoffs for whatever was that direction. The pipes appear to be capped now, meaning the valves have no function now
I currently have a 50 gallon water tank in my house and I want to replace it with a tankless system. The primary reason to replace it is space. I recently installed 2 HeatWorks Model 1 units to test them out (I left the tank in, luckily), but that fa
I am disappointed that you cut down the old stand as it would have been acceptable as a base for a new platform. The reason the old stand was raised (as your new platform should also be) was to keep the burner elevated. The burner is a source of igni