Questions about: water-heater - страница 1

You could just run the water for as long as you think it would take. Probably would have to run the hot until the water runs cold, then a little longer. This would basically ensure the water heater is cleared and the piping before it
We have an indoor geyser but are considering moving this outdoor to save space. We live in a Mediterranean climate with a cold winter day being 5°C (41°F) and summer temperatures generally ranging from 20-25°C (68-77°F). I imagine that the inside tem
In contract law, a warranty has various meanings but generally means a guarantee or promise[1] which provides assurance by one party to the other party that specific facts or conditions are true or will happen. This factual guarantee may be enforced
If the main water valve, and any other valves leading to the heater are open, then the pressure inside the tank will be equal to the supply pressure. Once the tank starts heating, however, the pressure will increase. If you have an old system that's
What's supposed to happen is that you're supposed to flush your hot water heater once a month by attaching a garden house to the tap at the bottom and opening it till it runs clear and you're supposed to decalcify it once a year or every two years wi
I have a 1/2" od PVC outside my home with a steady drip of water. It is a few inches above the line that runs to the TPR valve on the water heater (confirmed by opening the valve). It's not the AC condenser line either
Yesterday we installed a new water heater. Pretty straight forward, my father in law has done many of these. I monitored pretty closely for next 12 hours and the catch pan under the water heater continued to have water in it, even when no leaks could
I woke up two mornings ago to water that was colder than usual, so. . I naturally went to check the water heater and the pilot was out, the pilot light has never went out in the 4 years- almost 5 I've owned it
The 2014 NEC is adopted in Ohio. You need a dedicated circuit for these appliances: Refrigerator, Freezer, Electric range, Microwave, Water heater, Washer, Dryer, Dishwasher/garbage disposal, Furnace, Heat pump, Air conditioner (central and window),
I think you mean soldered? A picture would help, a lot. There should be a flexible line going from the valve to the pipe system that detaches by loosening the hex-nut fitting. If there isn't a flex, you will be cutting it out and installing it proper